Hydrogel Protector UV Nano Glass - iPhone 13 Pro (front shell)

• Model: UV FLEXIBLE Glass
• Compatible: iPhone 13 Pro

• High-quality hydrogel protector UV FLEXIBLE Glass
• The UV protector is made of high-quality materials with superior scratch and abrasion resistance.
• Effectively protects the screen from scratches, fingerprints, and other daily use damage, while providing excellent clarity and high transparency.
• To ensure a strong adhesion of the UV protector, it is cured for 3 minutes using a UV lamp, which hardens and adheres the protector to the display, following its curves.
• Resistant to daily impacts and scratches
• Fuller coverage, following the curves of the display.
• Soft and flexible protector that is thin enough and almost imperceptible /during curing, it hardens to the shape of the display/.
• Fully compatible with on-screen fingerprint sensors.

INSTALLATION:

1. Choose a dust-free environment to limit the adhesion of dust and particles to the screen.
2. Remove protective accessories from the device's display (if any).
3. Place the device on a flat surface and clean it thoroughly with the wipes included in the set – start with the wet one and then dry with the dry one.
4. Gently peel through the middle marked with "initial installation line" and attach to the middle of the display.
5. Gently push with a card /debit, credit, or similar/ thus sticking the protector to the screen.
6. Make sure the protector is completely adhered, including at the corners, and push again with a card if you see bubbles.
7. Carefully remove the topmost green layer and if there are bubbles, push again with the card /carefully/.
8. Connect a USB-C cable to the inner part of the box /cable is not included in the set/.
9. Once the inner part of the box lights up, close the smartphone, with the display /with the UV protector/ facing the UV lamps and cure for 3 minutes.

What's in the Box:

- 1 x UV FLEXIBLE Glass protector

- 1 x UV curing box

- 1 x wet wipe No. 1

- 1 x wet wipe No. 2