📦

Hydrogel protector UV Nano Glass - iPhone 13 Pro Max (front shell)

Арт. № 8646682

High-quality hydrogel protector UV FLEXIBLE Glass
The UV protector is made of high-quality materials with superior scratch and abrasion resistance.
Effectively protects the screen from scratches, fingerprints, and other daily use damages while providing excellent clarity and high transparency.
To ensure strong adhesion of the UV protector, it is cured for 3 minutes using a UV lamp, which hardens and adheres the protector to the display, following its curves.
Resistant to daily impacts and scratches
Fuller coverage, following the curves of the display.
Soft and flexible protector that is thin enough and almost invisible /during curing, it hardens to the shape of the display/.
Fully compatible with on-screen fingerprint sensors.

INSTALLATION:

Choose a dust-free environment to limit the adhesion of dust and particles to the screen.
Remove any protective accessories from the device's display (if any).
Place the device on a flat surface and clean it thoroughly with the wipes included in the kit – start with the wet one and subsequently dry with the dry one.
Slightly peel off through the middle with the marking "initial installation line and adhere to the middle of the display.
Carefully push with a card /debit, credit, or similar/ thus gluing the protector to the screen.
Make sure the protector is completely adhered, including at the corners, and push again with a card if you see bubbles.
Carefully remove the topmost green layer and in case of bubbles, push again with the card /carefully/.
Connect a USB-C cable to the inner part of the box /cable not included in the kit/.
Once the inner part of the box lights up, place the smartphone face down, so that the display /with the UV protector/ faces the UV lamps and cure for 3 minutes.

What's in the Box:

- 1 x UV FLEXIBLE Glass protector

- 1 x UV curing box

- 1 x wet wipe No. 1

- 1 x wet wipe No. 2