Hydrogel Protector UV Nano Glass - Samsung Galaxy A32 4G (front shell)

• Model: UV FLEXIBLE Glass
• Compatible: Samsung Galaxy A32 4G

• High-quality hydrogel protector UV FLEXIBLE Glass
• The UV protector is made of high-quality materials with superior resistance to scratches and abrasion.
• Effectively protects the screen from scratches, fingerprints, and other damage from daily use while ensuring excellent clarity and high transparency.
• To ensure a strong adhesion of the UV protector, it is cured for 3 minutes using a UV lamp, which hardens and adheres the protector to the display, following its curves.
• Resistant to daily bumps and scratches
• Fuller coverage, following the curves of the display.
• Soft and flexible protector that is thin enough and almost invisible /during curing, it hardens to the shape of the display/.
• Fully compatible with on-screen fingerprint sensors.

INSTALLATION:

1. Choose a dust-free environment to limit the adhesion of dust and particles to the screen.
2. Remove protective accessories from the device's display (if any).
3. Place the device on a flat surface and clean it thoroughly with the wipes included in the box – start with the wet one and subsequently dry with the dry one.
4. Peel slightly through the middle marked with "initial installation line" and adhere to the center of the display.
5. Gently push with a card /debit, credit, or similar/ thus gluing the protector to the screen.
6. Make sure the protector is fully adhered, including at the corners, and push again with a card if you see bubbles.
7. Carefully remove the topmost green layer and in case of bubbles push again with the card /carefully/.
8. Connect a USB-C cable to the inner part of the box /cable is not included in the box/.
9. Once the inner part of the box lights up, close the smartphone, making sure the display /with the UV protector/ faces the UV lamps and cure for 3 minutes.

What's in the Box:

- 1 x UV FLEXIBLE Glass protector

- 1 x UV curing box

- 1 x wet wipe No. 1

- 1 x wet wipe No. 2