UV Flexible Glass Hydrogel Protector for iPhone 14 Pro, Front Full

Арт. № 8649884

Compatibility iPhone SE (3rd generation)

High-quality UV FLEXIBLE Glass hydrogel protector
The UV protector is made of high-quality materials with superior scratch and abrasion resistance.
Effectively protects the screen from scratches, fingerprints, and other damage from daily use, while providing excellent clarity and high transparency.
To ensure a strong adhesion of the UV protector, it is cured for 3 minutes using a UV lamp, which hardens and adheres the protector along the display, following its curves.
Resistant to daily impacts and scratches
Fuller coverage, following the curves of the display.
Soft and flexible protector that is thin enough and almost imperceptible /during the curing process, it hardens to the shape of the display/.
Fully compatible with on-screen fingerprint sensors.

INSTALLATION:

Choose a dust-free environment to limit the adhesion of dust and particles to the screen.
Remove protective accessories from the device's display (if any).
Place the device on a flat surface and clean it thoroughly with the wipes included in the kit – start with the wet one and subsequently dry with the dry one.
Gently peel through the middle with the marking "initial installation line and adhere to the middle of the display.
Push gently with a card /debit, credit, or similar/ thus sticking the protector to the screen.
Make sure the protector is completely adhered, including at the corners and push again with a card if you see bubbles.
Carefully remove the topmost green layer and if bubbles are present push again with the card /carefully/.
Connect a USB-C cable to the inner part of the box /cable is not included in the box/.
Once the inner part of the box lights up, place the smartphone down, with the display /with the UV protector/ facing the UV lamps and cure for 3 minutes.

What's in the Box:

- 1 x UV FLEXIBLE Glass protector

- 1 x UV curing box

- 1 x wet wipe No. 1

- 1 x wet wipe No. 2